How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22289
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

My oil pressure light is blinking. There is oil, I have changed

Customer Question

My oil pressure light is blinking. There is oil, I have changed the oil sensor but still blinking
JA: Sometimes things that you think will be really complicated end up being easy to fix with a Chrysler. The Chrysler Mechanic I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so he can help you best.
Customer: The oil pressure light is blinking
JA: Are you hoping to fix this yourself?
Customer: If it does not need a specialized attention, I will fix myself
JA: Is there anything else the Chrysler Mechanic should be aware of about your Chrysler?
Customer: I am in Africa, currently in Congo. there is no Chrysler mechanic
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Chrysler Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Chrysler
Expert:  Lou P replied 1 year ago.
Hello, what year and model and engine do you have?
Customer: replied 1 year ago.
2006 Chrysler base 2.7L
Customer: replied 1 year ago.
Hi Are you there?
Expert:  Lou P replied 1 year ago.
i am sorry i am checking
Customer: replied 1 year ago.
Expert:  Lou P replied 1 year ago.
OK chrysler what? i need to know what model of chrysler
Expert:  Lou P replied 1 year ago.
You need to remove the pressure switch and make sure that you indeed have oil pressure with a pressure gauge, if so then we need to check the wiring, if not then you have more issues.
Customer: replied 1 year ago.
The model is Chrysler 300, 2006 Base Sedan 4 door 2.7L
Customer: replied 1 year ago.
Your answer is too generic, what should I do exactly ? Check the wiring to look for what? I am not a mechanics.
Expert:  Lou P replied 1 year ago.
ok sorry you feel that way, i will opt out , hopefully another expert can assist, my apologies.
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswerWas there oil in the sender connector when it was replaced?