How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric, Automotive Repair Shop Manager
Category: Chrysler
Satisfied Customers: 29719
Experience:  20+ years experience as automotive store manager and technician.
Type Your Chrysler Question Here...
Eric is online now
A new question is answered every 9 seconds

Transmission codes on 1999 Chrysler 300M after engine

Customer Question

Transmission codes on 1999 Chrysler 300M after engine replacement.
Recently replaced the engine and after everything was outback together the car will not move. I can move the shift lever and it acts like it is in gear but will not go forward or backwards. Codes P1782, P1784, and P0700 are showing.
Any ideas what maybe causing this?
Submitted: 7 months ago.
Category: Chrysler
Expert:  Eric replied 7 months ago.


I am sorry that you have not been helped yet. I just came online and saw your question.

Did you ohm out the wiring or just physically check them and if so, did you trace the wiring all the way between the transmission and tcm?

Also, if I can get the last 8 of the vin I can pull any needed schematics for testing

Related Chrysler Questions