How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 21594
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2011 Chrysler convertible where can I find a battery cut off

Customer Question

for a 2011 Chrysler convertible
where can I find a battery cut off switch that mounts at firewall
Submitted: 8 months ago.
Category: Chrysler
Expert:  sprinkles08 replied 8 months ago.

Hello and welcome to JustAnswer!

It would be best to disconnect the negative cable at the jump start post and use the provided hole in the end of the cable to slide back over the stud and isolate the cable.

If that isn't a possibility for some reason then this is the easiest type of disconnect to install. You would disconnect the battery negative cable at the jump start post, one hole of this would slide over the stud and bolt down, the other hole in the switch would need to be bolted to the negative cable.

http://www.summitracing.com/parts/mor-74104/overview/

Related Chrysler Questions