How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22294
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

My 2003 Dodge Ram is giving error code p0032 error from what

Customer Question

Hi pearl I'm Ron Manson my 2003 Dodge Ram is giving error code p0032 error from what I've read this is a h02s heater control circuit high bank 1 sensor 1 failure i installed a new up stream Bosch sensor I got from auto zone and have not been
JA: Sometimes things that you think will be really complicated end up being easy to fix with a Chrysler. The Chrysler Mechanic I'm going to connect you with knows all the tricks and shortcuts. Are you hoping to fix this yourself?
Customer: yes thank you trying to anyways lol
JA: Great! What have you tried so far?
Customer: I replace the sensor I tried deleting code with code reader no luck so far I inspected wiring and checked fuses so far no luck
JA: Is there anything else important you think the Chrysler Mechanic should know about your Chrysler?
Customer: Not really so far it's been a reliable vehichle
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the fully-refundable deposit now. While you're filling out that form, I'll tell the Chrysler Mechanic about your situation and connect you two.
Submitted: 1 year ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

This code could be caused by an issue with the heater control circuit wire, the sensor itself, or a loss of ground to the heater. Wiring issues are possible but oxygen sensor codes are most often set by failed sensors.

Bosch sensors are all but guaranteed to set heater codes on any Chrysler product with an NGC powertrain control module, and they're unreliable in general. Does your powertrain control module have three connectors or four?