How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 518
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

How do I REMOVE the CHIME Itself from a 1997 Plymouth

Customer Question

How do I REMOVE the CHIME Itself from a 1997 Plymouth Voyager? Where is the Chime Noise Maker itself physically located Please?
Submitted: 1 year ago.
Category: Chrysler
Expert:  bill replied 1 year ago.

its part of the circuit board on the instrument cluster so pulling it is NOT a simple procedure it will need to be unsoldered from the board and this may cause a problem with the board itself as it's processor is looking for the module

Related Chrysler Questions