How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 510
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

How do I remove front yoke on new process 245j transfer case

Customer Question

how do I remove front yoke on new process 245j transfer case no nut want to put new front seal output shaft thanks wayne ***@******.***
Submitted: 11 months ago.
Category: Chrysler
Expert:  bill replied 11 months ago.

I need the vin to pull the correct instructions and any special tools you may need

Customer: replied 11 months ago.
1j4hr58225c507316 20005 gr cheroke
Expert:  bill replied 11 months ago.

front output shaft seal CANNOT be serviced with the transfer case installed you MUST remove and disassemble the transfer case to service this seal.

would you like tear down instructions?

Related Chrysler Questions