How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 518
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

2006 chrysler 300c with factory Ds,dealer replaced both

Customer Question

2006 chrysler 300c with factory HIDs,dealer replaced both ballasts,both d1s bulbs, and both headlamp assemblies and the left hand low beam will not work, then changed headlight switch and fcm, still didnt fix it, changed alternator and battery still didnt fix it, all fuses are good, ballast and bulb swiched to right side and works fine, they cant figure it out and ive spent a fortune, now my right side works intermittently, what should i do
Submitted: 1 year ago.
Category: Chrysler
Expert:  Jeromy Madison replied 1 year ago.

Have you checked the wiring on that side from switch to ballast?

Customer: replied 1 year ago.
i changed both sides when i did the ballasts, bulbs and h/l assy
Expert:  Jeromy Madison replied 1 year ago.

Ok, but did you check to see if you have power to the ballasts?

Customer: replied 1 year ago.
the harness has power and the ground
Are good the dealer said
Customer: replied 1 year ago.
Ive spent over 3000.00 and they just cant figure it out with everything new, its driving me nuts
Expert:  Jeromy Madison replied 1 year ago.

Have you done a voltage drop test on the wires to the ballast? This will tell you if you are receiving enough power or not.