How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Juan Crespo Your Own Question
Juan Crespo
Juan Crespo, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 1513
Experience:  A.S.E. Master Technician, Advanced Level, Emissions - Asian, Domestic, & European
19298667
Type Your Chrysler Question Here...
Juan Crespo is online now
A new question is answered every 9 seconds

2000sebring, turns over great with no fire. Replaced

Customer Question

2000sebring, turns over great with no fire. Replaced distributer, plugs and wires.
Submitted: 1 year ago.
Category: Chrysler
Expert:  Juan Crespo replied 1 year ago.

Hi there. Welcome to our site.

I can help you, but first I need you to answer a couple of questions:

  1. When you say "no fire"; do you mean no spark, no injector pulse, neither?
  2. Are there any current and/or pending codes in the computer's memory?
Customer: replied 1 year ago.
Will turn over but no fire to spark plugs
Expert:  Juan Crespo replied 1 year ago.

So, it does have injector pulse? How about any codes?

Customer: replied 1 year ago.
Didn't have it checked for codes but the check engine light was on.
Expert:  Juan Crespo replied 1 year ago.

OK. Not being able to find out if there is or not injection pulse, or what code triggered the check engine light, limits what I can do to an educated guess and that guess is that the crank position sensor is bad.

I would very much like to help you diagnose this issue the right way and pinpoint its root cause, but that will entail you having access to tools such as a scanner, Noid lite, multimeter, and so on.

Best Regards.

Customer: replied 1 year ago.
Thats what everyone is saying. My honey just said auto zone said random misfires
Customer: replied 1 year ago.
How do I find out if it is the timing belt.
Expert:  Juan Crespo replied 1 year ago.

The timing covers on the front of the engine would have to be removed. Then the timing belt alignment should be checked against the attached graphic.

Best Regards.

Expert:  Juan Crespo replied 1 year ago.

Hi again. Just checking to see if the information I provided helped you solve your issue. If it did, kindly accept and rate my answer now. If it didn't, please reply.

Best Regards.

Related Chrysler Questions