How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad
Brad, Dealership Technician
Category: Chrysler
Satisfied Customers: 6970
Experience:  19 Yrs Chrysler/Dodge Technician..ASE Master Certified(L-1)
10114124
Type Your Chrysler Question Here...
Brad is online now
A new question is answered every 9 seconds

I have done the DREADED gone into mygig calibration mode RER

Customer Question

Hello - I have done the DREADED gone into mygig calibration mode for my RER mygig on Chrysler... Now I cannot do anything but use the HARD buttons.... Is there ANYTHING I can do to get the screen working back again for touch??? Anyone out here repair these things for this screen issue??? Or can you talk me though how I can correct it.... I cannot believe the cost of this thing and it's toast just from that calobration screen mess up!!!
Submitted: 1 year ago.
Category: Chrysler
Expert:  Brad replied 1 year ago.

Good evening and welcome to JustAnswer!!!

Have you tried a battery disconnect to see if the radio comes back on? If not disconnect the negative battery terminal for 5 min and see if the screen comes back on..

Talk soon,

Brad

Related Chrysler Questions