How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask b5demon Your Own Question
b5demon
b5demon, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 3718
Experience:  ASE and Chrysler master technician with over 17 years in dealer
13235514
Type Your Chrysler Question Here...
b5demon is online now
A new question is answered every 9 seconds

Sprinkles,i have a 99 chr concrode 3.2,with 41.000 miles on

Customer Question

hi sprinkles,i have a 99 chr concrode 3.2,with 41.000 miles on it .the car ran great with no problems ,or nosies, just runing around town,feel a shudered and then i notice car isnt shifting, but ever thing seems ok , except car wont go out of 2nd, ran the code reader and got 731 715 700 then ran it again and got 700, 731
Submitted: 1 year ago.
Category: Chrysler
Expert:  b5demon replied 1 year ago.

Hi Welcome to Just Answer! The p0700 code is a general trans fault the computer uses this fault to tell the engine controller to turn on the check engine light. The p0731 is gear ratio error in first gear. Is the speedometer working normally?

Related Chrysler Questions