How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris, Technician
Category: Chrysler
Satisfied Customers: 13474
Experience:  30 years certified Chrysler technician, smog license Certified Master Technician
Type Your Chrysler Question Here...
Chris is online now
A new question is answered every 9 seconds

Intermittent no crank on 2005 crossfire ,some suggest the

Customer Question

Intermittent no crank on 2005 crossfire ,some suggest the logic module
Finally it would not crank, I pulled the modules out next to acc. fuse block under hood to check power on p/w wire and purple wire and then it cranked and ran. I meant to say pulse module
Submitted: 1 year ago.
Category: Chrysler
Expert:  Chris replied 1 year ago.

Hello and welcome to just answer. I have seen issues with the connector terminals at the pulse module. Clean and tighten all terminals at the module. If the problem continues, then suspect an internal connection problem with the pulse module and replace it. I hope that this information is helpful and please let me know if you need further assistance.