How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Your Own Question
Chad
Chad, Lead Master Tech
Category: Chrysler
Satisfied Customers: 1114
Experience:  Electrical master,Diesel Specialist,Lead tech/ shop foreman
12781541
Type Your Chrysler Question Here...
Chad is online now
A new question is answered every 9 seconds

My 1999 chrysler 300m is stalling and even at speed it seems

Customer Question

my 1999 chrysler 300m is stalling and even at speed it seems to want to cut out - burbs. It is a hit or miss on starting it backup - either it starts right up or it takes a few cranks to get it going.
Submitted: 1 year ago.
Category: Chrysler
Expert:  Chad replied 1 year ago.

Do you still need assistance?

Customer: replied 1 year ago.
I do! I have been told that it might be either the camshaft sensor or the crankshaft sensor? I did replace the camshaft sensor about 2 years ago. Do you think it could go bad again or any other ideas?
Expert:  Chad replied 1 year ago.

Yes, they can go bad again.

Sounds like a cam sensor though.

I would recommend getting a new one from the dealer, not an auto parts store.

Customer: replied 1 year ago.
OK Thanks
Expert:  Chad replied 1 year ago.

Let me know if you need anything else.

Related Chrysler Questions