How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 21586
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I have a 2008 Chrysler 300c the Alarm is Alarming and it

Customer Question

I have a 2008 Chrysler 300c the Alarm is Alarming and it wont allow me to reprogram a key any suggestions
Submitted: 1 year ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer!
If the alarm is going off it's because it wasn't disarmed before the door was opened. If keyless entry doesn't work and the key doesn't work to start the engine then there isn't a way to disarm it. If you're unable to program a replacement key then I would first suspect a failed wireless ignition node.
Has a second key been tried?
Does RKE not work?
Has a battery disconnect been tried?
Customer: replied 1 year ago.
Multiple keys have been tried, RKE does not work and yes the battery has been disconnected.
Expert:  sprinkles08 replied 1 year ago.
Multiple keys stopped working at exactly the same time?
Customer: replied 1 year ago.
No i dropped the original key and it split in half. I only had 1 so i tried to get one programmed upon opening the door the alarm went off and now it goes off anytime the door is opened , with no working key i cant deactivate the alarm. It also will not let a locksmith create a new key.
Expert:  sprinkles08 replied 1 year ago.
It doesn't sound as if multiple keys have actually been tried then.
Does the WIN have communication with a scan tool?
Customer: replied 1 year ago.
it does i just found out there is a recall on my car
Expert:  sprinkles08 replied 1 year ago.
What fault codes are setting in the WIN?
Customer: replied 1 year ago.
No codes come up thats why the locksmitg was confused. He communicates but cant get the key to program
Expert:  sprinkles08 replied 1 year ago.
What happens after the PIN is put in?

Related Chrysler Questions