How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22107
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Car won't start chrysler 300c 2006

Customer Question

Car won't start chrysler 300c 2006
Submitted: 1 year ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer!
There are quite a few things that could be causing a no start condition, especially depending on what it is actually doing. Based on what you've replaced it sounds like the engine may be starting and dying. If it's starting, running for two seconds and dying abruptly then the problem is related to the SKIM system which uses a module in the dash that communicates with the key. it wasn't uncommon for the wireless control module to either fail or lock up electronically and cause a start/die issue.
What happens when you try to start the engine?

Related Chrysler Questions