How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 21990
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Chrysler town and country: 2008 Chrysler town and country a/

Customer Question

2008 Chrysler town and country a/ c blows cold on fan speeds 1,2,3 but warm on highest setting. Front and rear.
Submitted: 1 year ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer!
The amount of heat transfer between the air and evaporator is dependent on speed. If the air is moving more quickly across the evaporator then it won't cool as well as if the air is moving slowly. when you turn the blower motor to a higher speed it will always cool less then a lower speed. The optimum speed for cooling would be the second or third setting.
If you're feeling a substantial warm up when setting the blower motor to full speed the issue is with the performance of the a/c system. It could be a compressor issue, expansion valve, or a restriction in the system causing poor performance but the problem is almost surely being caused by low charge. The first step in diagnosis will be to recover, vacuum and recharge the system to the proper level. This will almost surely take care of the problem.