How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask J F Your Own Question
J F
J F, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 365
Experience:  Car mechanic from 2002-2011. Worked on all Chrysler products in a aftermarket shop.
77834996
Type Your Chrysler Question Here...
J F is online now
A new question is answered every 9 seconds

Chrysler LHS: 1999 chrysler lhs will turn over but won't start

Customer Question

1999 chrysler lhs will turn over but won't start stopped when I was going down the road
Submitted: 1 year ago.
Category: Chrysler
Expert:  J F replied 1 year ago.
Hello and thank you for visiting our site. i do have a question. is there any you can verify that you have spark? possibly using a spare plug. this would help greatly.thank you
Customer: replied 1 year ago.
It has spark
Expert:  J F replied 1 year ago.
Thank you next we need to check for fuel injector pulse. all you need is a test light and place the clip on part onto the positive terminal. then picking any one of the injectors you can either back probe or unplug it and place it in the wire terminal thats not Dark Green/light green wire. then crank the vehicle if the test light does not flash most likely its a security issue. you would need a capable scan tool to verify. if the test light does flash then you need to check the fuel pressure next. to check fuel pressure you will need a special adapter pressure is around 50lbs but if you have 35 that would still start this vehicle . i assume you have checked all fuses and know there is gas in the vehicle. i would swap your fuel pump relay with another relay to verify its not just a bad relay. its not common that a fuel pump relay goes out but it is possible. i have attached a link to the fuses and relays.LINKThanksIf you have anymore questions please just ask.Please don't forget to leave feed back. (Thats how I get paid.)