How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 21570
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Chrysler 2005: my name its dan ,i m have a 05chrysler sebring

Customer Question

hi my name its dan ,i m have a 05chrysler sebring conv.have a p0700 code ,car runs fine until wanna pass 2900rpm and bogs down...already try imp-out selenoids-transm selenoids pack oil filter...not know what else to do...
Submitted: 1 year ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer!
P0700 sets in the engine controller side of the powertrain control module when there is a fault code set in the trans controller side. The trans controller has seen an issue somewhere in a monitored component and has set a fault code. With everything you've replaced it really only leaves the range sensor, internal trans, the TCM, trans relay and wiring.
Do you know what codes are setting in the TCM?

Related Chrysler Questions