How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 510
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Chrysler sebring lx convertible: my drivers side low beam bulb

Customer Question

my drivers side low beam bulb is out and I'd rather not spend a lot of $ . can I do it myself?
Submitted: 1 year ago.
Category: Chrysler
Expert:  Stone314 replied 1 year ago.
good evening my name is***** will try to assist you.
Expert:  Stone314 replied 1 year ago.
Yes you can purchase the bulb from autozone.HEADLAMP BULB CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result. REMOVAL 1. Disconnect and isolate battery negative cable. 2. Remove headlamp unit retaining screws. 3. Remove headlamp unit to expose back of unit. 4. Disconnect wire connector from back of headlamp bulb. 5. Rotate retaining ring counterclockwise. 6. Remove retaining ring. 7. Pull headlamp bulb and remove from headlamp unit. INSTALLATION 1. Install headlamp bulb to the headlamp unit. 2. Install headlamp bulb retaining ring. 3. Rotate retaining ring clockwise. 4. Connect wire connector to bulb. 5. Install the headlamp unit. 6. Install headlamp unit retaining screws. 7. Connect the battery negative cable.
Expert:  Stone314 replied 1 year ago.
HEADLAMP UNIT REMOVAL 1. Disconnect and isolate the battery negative cable. 2. Remove the two retaining screws. 3. Remove upper fascia retainers by prying under the head of the fasteners with a flat bladed tool. 4. Remove headlamp unit from fender side first, then pull headlamp unit out. 5. Disconnect the wiring harness from the bulbs. 6. Remove the headlamp unit.

Related Chrysler Questions