How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 21597
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Chrysler 300 C: in a 2009 300c .The vehicle stall and lighting

Customer Question

in a 2009 300c .The vehicle stall and lighting bolt light comes on.what it might be and how do I get rid of this problem.
Submitted: 1 year ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer!

There are quite a few things that can cause the engine to die. You may have a failing crank sensor or wiring issue, the powertrain control module may be going down due to an internal failure or loss of power or ground, you could be losing fuel pressure, if it only happens at low speed or idle then the EGR valve could be opening without the engine controller knowing it due to a bad EGR position sensor.

The first step in diagnosing the problem is to see if any fault codes are setting. Have you checked the PCM for fault codes?