How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 33407
Experience:  #@ years in the Automotive repair field.
7276279
Type Your Chrysler Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a Chrysler pacifica that is still having problems starting

Customer Question

I have a Chrysler pacifica that is still having problems starting after replacing an alternator a battery and 3 starters the parts my husband replaced were factory parts this is a 2004 he replaced everything after 3 episodes of the car not starting the car did not come with the original key I had to have a locksmith cut the key I love the car but I'm up to my eye balls with replacement of parts
Submitted: 1 year ago.
Category: Chrysler
Expert:  Ron replied 1 year ago.
Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
The problem you are having can be caused by any of the following,
Ground G101
Ignition Switch
Powertrain Control Module (PCM)
Range Sensor
Wiring
One very common cause is a loose and dirty ground 101 at the rear of the engine, see its location in the link below, copy and paste the link to your browser to open and view it.
https://dl.dropboxusercontent.com/u/104923897/G101%20APR%2030.pdf
If the ground checks okay then check the steps in the link below.
https://dl.dropboxusercontent.com/u/104923897/No%20start%20APR%2030.pdf

Related Chrysler Questions