How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask autodoc_2000 Your Own Question
autodoc_2000, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 2563
Experience:  ASE Master Certified W/ Advanced Engine Performance
Type Your Chrysler Question Here...
autodoc_2000 is online now
A new question is answered every 9 seconds

images where crash sensors are located for a front end collision for a 2005 chrysler cross

Customer Question

images where crash sensors are located for a front end collision for a 2005 chrysler crossfire? both driver and passenger bags blown, have replaced both, but airbag light still on. also where is the airbag module located in the crossfire. Any suggestions on how to get the light off??
Submitted: 4 years ago.
Category: Chrysler
Expert:  autodoc_2000 replied 4 years ago.

autodoc_2000 :

Two sensors are contained within the Occupant Restraint Controller (ORC), an electronic impact sensor and a safing sensor. The Occupant Restraint Controller (ORC) also monitors inputs from two remote side impact sensors located under the carpet directly below the front seats, to control the deployment of the side impact airbag units.

  • Remove the center console.
  • Disconnect the occupant restraint controller harness connector (2).
  • Remove the bolts (1) attaching the occupant restraint controller to the transmission tunnel.
  • Remove the occupant restraint controller from the vehicle.

Full Size Image

JACUSTOMER-3vtbrcwk- :

ok, is the (occupant restraint controller (the same as what i am calling airbag module...

JACUSTOMER-3vtbrcwk- :

are the OCR the same as when i am referring to airbag module?

Related Chrysler Questions