How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 20516
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

jeep liberty: stop working..fuse box inside the vehicle..relay located

Customer Question

power windows just stop working in a jeep liberty the fuses are good in the engine comparment and the fuse box inside the vehicle, where is the power windows relay located
Submitted: 4 years ago.
Category: Chrysler
Expert:  Don 'Mo Lurch' replied 4 years ago.

 

Relay is located in the Relay Junction Block

 

concealed behind the left outboard end of the instrument panel on left hand drive vehicles

 

graphic

 

 


Your DEPOSIT is not payment

I have sent the information you have requested & have answered .
If you have more questions about a different problem or area, it is considered to be "additional" & may have to Relist.

 

PLEASE click ACCEPT on your page, so that I may get credit for my Answer at this time, thanks.

Even if you are a subscription or trial member you must click "Accept" for me to be paid

Don 'Mo Lurch' and 2 other Chrysler Specialists are ready to help you
Customer: replied 4 years ago.
i swaped the 2 relays, defoger for power windows same result
Expert:  Don 'Mo Lurch' replied 4 years ago.

 

 

do one of these:
supply Ground to PIN 85 of the Window Relay
OR
Fused voltage to PIN 87

try windows

 

Attachments are only available to registered users.

Register Here

Attachments are only available to registered users.

Register Here

Attachments are only available to registered users.

Register Here
View Full Image

Attachments are only available to registered users.

Register Here

 

 

 

Customer: replied 4 years ago.
Thanks for you help with this Power window Issue after checking the relay and had to run to Autozone for the Chilton Book I found that the power window master switch just stop working, kind a weird , but checking with the meter didn't make any readings when pressing any of the 4 buttons.
Expert:  Don 'Mo Lurch' replied 4 years ago.

 

 

I found that the power window master switch just stop working, kind a weird , but checking with the meter didn't make any readings when pressing any of the 4 buttons.

 

Have you repaired the problem or do you still need further?

 

 

Customer: replied 4 years ago.
It's Fixed Thanks
Expert:  Don 'Mo Lurch' replied 4 years ago.

 

 

THANK YOU

Hope I was able to help

Thank you for the Update
Thanks for using J/a

 

 

Related Chrysler Questions