How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Amedee Your Own Question

Amedee
Amedee, Chrysler Technician
Category: Chrysler
Satisfied Customers: 21944
Experience:  ASE Master Technician advanced level specialist. Wisconsin certified emissions state inspector
279429
Type Your Chrysler Question Here...
Amedee is online now
A new question is answered every 9 seconds

2000 chrysler grand voyager: fuse box..ecm..it stops,( van wont start

Customer Question

i have a 2000 chrysler grand voyager 3.3 flexfuel. was in small fender bender where only front dr side fender got bent( about softball size right next to fuse box and ecm) when i go to start it it just rapidly ticks, i then pull the key still ticking i disconnect battery then it stops,( van wont start)
Submitted: 2 years ago.
Category: Chrysler
Expert:  SuperDave replied 2 years ago.
Did you check your battery voltage?
Customer: replied 2 years ago.
brand new baTTERY
Expert:  Amedee replied 2 years ago.
Hello!

New Expert here

If the new battery is good, then you either have a bad connection at or after the battery or further down closer to the fuse block causing your condition. Another thing would be a bad ground causing this condition.

This ticking you are hearing is just low voltage. It is either the starter or relays clicking because they have low voltage.

I would use a voltmeter and check for power on the fuses under the hood and at the starter with the key in the CRANK position.

Chances are you will find your problem.

I hope this helps! Please let me know if you have any further questions!

JustAnswer in the News:

 
 
 
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
 
 
 

What Customers are Saying:

 
 
 
  • I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat. Stan Sayre, PA
< Last | Next >
  • I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat. Stan Sayre, PA
  • I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP. TOM WHITTAKER USA
  • Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless! Rev. Jerry Baysinger Holts Summit, Mo
  • I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again. Greg Pittsburgh, PA
  • Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless! Jerry Holts Summit, MO
  • Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor. Lynn B. Ormond Beach, FL
  • Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help. Mary C. Freshfield, Liverpool, UK
 
 
 

Meet The Experts:

 
 
 
  • Don 'Mo Lurch'

    Aftermarket & Factory Electronics

    Satisfied Customers:

    384
    Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
< Last | Next >
  • http://ww2.justanswer.com/uploads/MO/molurch/2012-6-6_214526_500.64x64.png Don 'Mo Lurch''s Avatar

    Don 'Mo Lurch'

    Aftermarket & Factory Electronics

    Satisfied Customers:

    384
    Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
  • http://ww2.justanswer.com/uploads/2P/2paulm/2012-4-4_183431_justabswer.64x64.jpg Paul M ASE Master's Avatar

    Paul M ASE Master

    ASE Master Tech

    Satisfied Customers:

    117
    ASE Master Tech 20+ Years
  • http://ww2.justanswer.com/uploads/MU/muddyford/2012-6-13_1204_1.64x64.png Chris (aka - Moose)'s Avatar

    Chris (aka - Moose)

    Technician

    Satisfied Customers:

    93
    16 years of experience
  • http://ww2.justanswer.com/uploads/IV/ivestoy2/2011-7-21_44030_ivan.64x64.jpg Ivan's Avatar

    Ivan

    ASE Certified Master Technician

    Satisfied Customers:

    55
    ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.
  • http://ww2.justanswer.com/uploads/AC/acuramstr/2012-6-6_181032_me.64x64.jpg AUTOMSTR's Avatar

    AUTOMSTR

    ASE Certified Technician

    Satisfied Customers:

    0
    ASE Master Tech, L1, CA Smog ,30 YRS EXP
  • http://ww2.justanswer.com/uploads/AM/amedee/2013-10-24_23656_Amedee1.64x64.jpg Amedee's Avatar

    Amedee

    Chrysler Technician

    Satisfied Customers:

    787
    ASE Master Technician advanced level specialist
  • http://ww2.justanswer.com/uploads/SU/supermechanic/2013-8-23_03546_500.64x64.jpg Jerry's Avatar

    Jerry

    Master Mechanic

    Satisfied Customers:

    432
    ASE Master tech. 30+ years mechanic, shop forman, service manager
 
 
 
Chat Now With A Chrysler Mechanic
Amedee
Amedee
Chrysler Mechanic
21944 Satisfied Customers
ASE Master Technician advanced level specialist. Wisconsin certified emissions state inspector