How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daryl Your Own Question
Daryl, Shop Owner, Master Mechanic
Category: Chrysler
Satisfied Customers: 12548
Experience:  28 years experience, Master Mechanic
Type Your Chrysler Question Here...
Daryl is online now
A new question is answered every 9 seconds

Remove the hub/bearing assembly from a 2006 pacifica fwd, 3.5l

Resolved Question:

How do I remove the hub/bearing assembly from a 2006 pacifca fwd, 3.5l
Submitted: 5 years ago.
Category: Chrysler
Expert:  Daryl replied 5 years ago.
Are you working on the front or rear hub?
Customer: replied 5 years ago.
Rear hub
Expert:  Daryl replied 5 years ago.
If you have the bolts out the hub is just hammered off, I usually use the biggest hammer I have, I hit the part that has the wheel studs in it.
Daryl and 2 other Chrysler Specialists are ready to help you