How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris, Technician
Category: Chrysler
Satisfied Customers: 13257
Experience:  30 years certified Chrysler technician, smog license Certified Master Technician
Type Your Chrysler Question Here...
Chris is online now
A new question is answered every 9 seconds

2004 Sebring: the left rear power window does not work..regulator

Resolved Question:

I have a 2004 Sebring convertible and the left rear power window does not work. How
do I remove the motor and regulator? I have removed the side panels and still am unable
to remove these items.
Submitted: 6 years ago.
Category: Chrysler
Expert:  Chris replied 6 years ago.

Hello and welcome to just answer. These rear quarter window regulators are no fun at all to replace. Here is the procedure from the factory service manual. Hopefully this will be helpful.





  1. Raise quarter glass to full up position, if possible, to aid in removal.
  2. Remove quarter trim panel.
  3. Partially lower convertible top.
  4. Disconnect wire connector to power window motor.
  5. Remove fasteners holding quarter window module to inner quarter panel (Quarter Window Module).
  6. Lift quarter window module upward and out opening at top of quarter panel.
  7. Separate quarter glass from quarter window module (Quarter Glass).


  1. Lower quarter window module into position through opening in top of quarter panel.
  2. Install fasteners holding quarter window module to inner quarter panel.
  3. Connect wire connector to power window motor.
  4. Raise glass lift channel to full up position.
  5. Position quarter glass on quarter window module.
  6. Loosely install fasteners holding quarter glass to quarter window module.
  7. Lower and secure convertible top.
  8. Adjust quarter glass as necessary (Refer to 23 - BODY/ADJUSTABLE QUARTER GLASS - ADJUSTMENTS).
  9. Install quarter trim panel.
  10. graphicgraphic
Chris and 3 other Chrysler Specialists are ready to help you

Related Chrysler Questions