How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Alex Your Own Question
Alex, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 1158
Experience:  ASE Certified Master Technician, L1 Advanced Level Specialist
Type Your Chrysler Question Here...
Alex is online now
A new question is answered every 9 seconds

Chrysler 300 Have a 2006 Chrysler 300C and the dipstick broke

Resolved Question:

Have a 2006 Chrysler 300C and the dipstick broke off at handle. How difficult is it to repair.?
Submitted: 5 years ago.
Category: Chrysler
Expert:  Alex replied 5 years ago.
Hello. My name is XXXXX XXXXX I'll be assisting you with your question.

Have you attempted to remove the broken dipstick from the tube? If so, what have you tried?
Customer: replied 5 years ago.
No it is in too tight. It has been very difficult to get out since the car was new.It is broken off about 1/2 in from the top of the tube.
Expert:  Alex replied 5 years ago.
Most of the time, you can get the dipstick out by using a drill and a long thin drill bit. Drill straight down into the plastic of the dipstick, then pull the drill bit straight out, it should bring the dipstick with it.

If that doesn't work, you can thread a small screw into the hole and pull it out with needle nose pliers.
Alex and 5 other Chrysler Specialists are ready to help you

Related Chrysler Questions