How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Your Own Question
Chad, Lead Master Tech
Category: Chrysler
Satisfied Customers: 1094
Experience:  Electrical master,Diesel Specialist,Lead tech/ shop foreman
Type Your Chrysler Question Here...
Chad is online now
A new question is answered every 9 seconds

Chrysler Sebring: comes sensor..crank sensor, timing marks

Customer Question

2006 Chrysler Sebring 2.4 L DOHC
Code comes back when started>
new cam sensor, crank sensor, timing marks look good, cam magnet looks good,
Submitted: 5 years ago.
Category: Chrysler
Expert:  Chad replied 5 years ago.
One of the sensors is pulling down either the 5 volt supply or the signal.
It could be the A/C pressure transducer.It shares the same 5 volt wire as do the TPS and MAP sensors.
The ground is shared with TPS, MAP,IAT,ECT,A/C pressure transducer, cam and crank sensors.
Anyone of these sensors could cause the code you are having. You need to monitor all these sensors while running and with the key on engine off.

Related Chrysler Questions