How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Your Own Question
Chad, Lead Master Tech
Category: Chrysler
Satisfied Customers: 1094
Experience:  Electrical master,Diesel Specialist,Lead tech/ shop foreman
Type Your Chrysler Question Here...
Chad is online now
A new question is answered every 9 seconds

2001 chrysler 300 camshaft sensor location please

Customer Question

2001 chrysler 300 camshaft sensor location please
Submitted: 5 years ago.
Category: Chrysler
Expert:  Chad replied 5 years ago.

The camshaft position sensor is installed in the timing belt housing cover above the left camshaft sprocket.

  1. Disconnect the negative battery cable.
  2. Loosen the upper intake plenum, refer to the Intake System section.
  3. Disconnect electrical connector from sensor.
  4. Remove camshaft position sensor screw.
  5. Pull sensor up out of the timing belt housing cover.
Number 1 in the picture

View Full Image

Related Chrysler Questions