How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Chrysler Tech -
Category: Chrysler
Satisfied Customers: 17948
Experience:  18+yrs experience. State Inspector & Chrysler Diagnostics
18617752
Type Your Chrysler Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

Remove a starter from a 2001 Sebring coupe, with a 3.0 engine?

This answer was rated:

How do you remove a starter from a 2001 Sebring coupe, with a 3.0 engine?

 

You will need to remove the Air Cleaner housing assembly to gain access to the starter mounting bolt.

graphic

 

graphic

Customer: replied 6 years ago.
Will I need any special tools, do I need to take the air cleaner housing entirely apart, and do you think I would be better off having a professional do this? Also , how long should this take to completely finish this project?

No special tools needed. Most of the housing will need to be removed. Follow the removal steps given in the order stated in the image above. This isn't a bad job for a DIY'er, you should be ok. The labor time guide calls for .9hr (just shy of an hour) to complete the job.

 

Ron Z. and 5 other Chrysler Specialists are ready to help you

Related Chrysler Questions