How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ricardo hohl Your Own Question
ricardo hohl
ricardo hohl, Instructor
Category: Chrysler
Satisfied Customers: 4078
Experience:  ase master/factory certified/and automotive instructor
Type Your Chrysler Question Here...
ricardo hohl is online now
A new question is answered every 9 seconds

Replace a starter on a 2002 PT Dream Cruiser?George, [email protected]

Resolved Question:

How do you replace a starter on a 2002 PT Dream Cruiser?

George,[email protected]
Submitted: 6 years ago.
Category: Chrysler
Expert:  ricardo hohl replied 6 years ago.
Chat Conversation Started
ricardo hohl :

hi, would you like me to download the procidure for you?

Customer :


ricardo hohl :

ok i am going to change the window to send you the page please make sure you copy or print the page right away. to prevent deletion

Expert:  ricardo hohl replied 6 years ago.
please copy or print.


  1. Open Hood
  2. Remove air cleaner box cover Refer to Fuel Delivery, Removal and Installation, Air Cleaner Box.

Fig. 4 Battery Negative Cable Remove/Install

  1. Disconnect and isolate the battery negative cable (Fig. 4).
  2. Raise vehicle on hoist.
  3. Remove Engine Structural Collar.

Fig. 5 Starter Remove/Install

  1. Disconnect starter motor wiring (Fig. 5).
  2. Remove starter motor mounting bolts (Fig. 5).
  3. Remove starter motor from vehicle.


  1. Reinstall starter motor into vehicle lower engine compartment.
  2. Install starter motor mounting bolts and torque to 54 Nm (40 ft. lbs.) .
  3. Connect starter motor wiring. Torque solenoid battery cable nut to 10 Nm (90 in. lbs.) .
  4. Install Engine Structural Collar.

CAUTION: The torque procedure for the structural collar must be followed, as damage to the oil pan or collar could occur.

  1. Lower vehicle from hoist.
  2. Reconnect battery negative cable.
  3. Reinstall air cleaner box cover.
  4. Verify operation of vehicle and systems.
  5. Close hood and remove from hoist.
ricardo hohl and other Chrysler Specialists are ready to help you

Related Chrysler Questions