How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
Type Your Chrysler Question Here...
brownjeff is online now
A new question is answered every 9 seconds

Where is the PT Cruiser Transmission Speed Sensor located and

This answer was rated:

Where is the PT Cruiser Transmission Speed Sensor located and is it something I can do?
Please tell me the year of the vehicle and I will send information on how to replace it.
Customer: replied 6 years ago.

2001 PT Cruiser


  1. Disconnect the battery cables.

Remove air cleaner assembly (Fig. 92).

Remove the battery hold down clamp and remove the battery (Fig. 93).


  1. Remove the battery tray (Fig. 94).
  2. Disconnect output speed sensor connector.

Unscrew and remove output speed sensor (Fig. 95).


  1. Inspect speed sensor O-ring (Fig. 96) and replace if necessary.


  1. Verify O-ring is installed into position (Fig. 96).
  2. Install and tighten output speed sensor to 27 Nm (20 ft. lbs.).
  3. Connect speed sensor connector.
  4. Install the battery tray (Fig. 94).
  5. Install the battery and hold down clamp (Fig. 93).
  6. Install air cleaner assembly (Fig. 92).
brownjeff and 5 other Chrysler Specialists are ready to help you