How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
Type Your Chrysler Question Here...
brownjeff is online now
A new question is answered every 9 seconds

torque specs..main bearing and connecting rod bearings..amp..stereo

This answer was rated:

What are the torque specs for the main bearing and connecting rod bearings?
Where in the amp for the infineon stereo system?
The amp is located under the dash by the heater and a/c box


NOTE: The main bearing cap bolts must be tightened in the proper sequence. First the inner main cap bolts, secondly the windage tray bolts, lastly the main cap tie (horizontal) bolts.

1.Inside Main Bearing Cap Bolts 20 Nm (15 ft. lbs.) + 1/4 turn
2.Windage Tray Bolts 27 Nm (20 ft. lbs.) + 1/4 turn
3.Main Cap Tie (horizontal) Bolts 28 Nm (250 in. lbs.)




Connecting Rod Cap Nuts 54 Nm (40 ft. lbs.) + 1/4 turn



brownjeff and 6 other Chrysler Specialists are ready to help you

Related Chrysler Questions