How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask moparfl Your Own Question
moparfl
moparfl, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 6330
Experience:  ASE and CHRYSLER Master Tech 30 years Chrysler Dodge&Jeep Dealership Exp
13195827
Type Your Chrysler Question Here...
moparfl is online now
A new question is answered every 9 seconds

I got a check engine light with a P0032 error code, O2 sensor

Customer Question

I got a check engine light with a P0032 error code, O2 sensor heater, changed out sensor with a Bosch, code went away and all was good for a couple days, then check engine came back on now with P0132. Disconnected battery for 30 mins, alls good for about 2 days, then code is back, any thoughts? 2004 Chrysler Town and Country 3.8 L touring edition.
Submitted: 6 years ago.
Category: Chrysler
Expert:  moparfl replied 6 years ago.
This could just be a bad sensor. You would need a scan tool that will let you look at live data to be able to see if the sensor is working. If it were me I would just take that sensor back and install another one and try it.first
Customer: replied 5 years ago.
replaced sensor twice, further research indicated that non-OEM, and specifically Bosch replacement oxygen sensors do not work for Chrysler/Dodge vehicles even though they say they will.

Related Chrysler Questions