How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike V.v Your Own Question
Mike V.v
Mike V.v, Technician
Category: Chrysler
Satisfied Customers: 23840
Experience:  25 years automotive experience all makes and models, Subaru and Nissan factory trained.
2921078
Type Your Chrysler Question Here...
Mike V.v is online now
A new question is answered every 9 seconds

How do you remove the tail light assembly on 2005 Town & Country van?

This answer was rated:

How do you remove the tail light assembly on 2005 Town & Country van?

graphicGreetings and welcome to JA! I will do my very best to assist you with your problem.

Lift the gate, remove the 2 fasteners from the inside edge of the assembly. Then pull the assembly out and away from the body to release the tabs holding it to the body. Reverse order for install. Here is a diagram to help!

 

Customer: replied 6 years ago.
The fasteners have no screwdriver slots and don't seem to want to unscrew. My old 1995 van had slots and it was obvious.
Is there something I need to know about the 2005?
Yes, they just pop out, they aren't screws just clips. You have to get under the heads and pry them out. Sort of like a nail. Sorry!
Mike V.v and other Chrysler Specialists are ready to help you

Related Chrysler Questions