How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, triple chrysler master tech
Category: Chrysler
Satisfied Customers: 2251
Experience:  43 years,triple chrys ,ase master tech,l1,t2 b5 a1-a8 Hev spec.
9510839
Type Your Chrysler Question Here...
John is online now
A new question is answered every 9 seconds

Crossfire: ignition key will not turn the ignition switch..unlock

Customer Question

Crossfire 2004 the ignition key will not turn the ignition switch and unable to unlock. How do I fix this problem?
Submitted: 6 years ago.
Category: Chrysler
Expert:  John replied 6 years ago.
Hi my name is john.

To try and start the car, did you try a different key first.

Than try tapping on the end of the key while it in the ignition switch with a plastic hammer several times while trying to turn the ignition lock cylinder.

if that don't work you will need to replace the lock cylinder it self.

let me know
Customer: replied 6 years ago.
I tried to start the car the key will not turn the ignition switch and the steering is lock because the ignition switch will not disengage the lock pin. I tried tapping on the end of the key, like what you said and still it did not work.Tell me how to remove those panel board/covering to be able to get access to ignition switch and to the lock pin. Thanks
Expert:  John replied 6 years ago.
graphic
graphic
graphic
graphic
graphic
graphic
graphic
graphic
I think there is a tab where the lock pin is that has to lifted
Expert:  John replied 6 years ago.
Let me know if you need more.

If I have help you,please push the accept button when were done.

Thank you for choosing just answer