How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask David Dill Your Own Question
David Dill
David Dill, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 1314
Experience:  19 years as Technician, 14 years with Chrysler Group LLC
14774302
Type Your Chrysler Question Here...
David Dill is online now
A new question is answered every 9 seconds

2000 Chrysler Concorde: 2000 Chrysler Concorde, 2.7L V6 engine.An

Resolved Question:

2000 Chrysler Concorde, 2.7L V6 engine.
An alternator replacement procedure.
Submitted: 6 years ago.
Category: Chrysler
Expert:  David Dill replied 6 years ago.

Here is the service manual procedure:

GENERATOR - 2.7L

REMOVAL

  1. Disconnect negative battery cable.
  2. Raise and support vehicle.
  3. Remove lower plastic splash shield.
  4. Remove transmission cooler and reposition cooler out of the way.
  5. Remove lower radiator crossmember support and position a jackstand under radiator for support.
  6. Loosen adjusting T-bolt, but do not remove.
  7. Loosen pivot bolt, but do not remove.
  8. Remove the generator drive belt. Refer to the Cooling System section.
  9. Disconnect the generator field circuit plug.
  10. Remove the B+ terminal nut and wire.
  11. Remove pivot bolt, being careful not to lose spacer.
  12. Remove generator.

INSTALLATION

  1. Install generator.
  2. Install pivot bolt, leave loose.
  3. Connect the generator field circuit plug.
  4. Install the B+ terminal nut and wire.
  5. Install the generator drive belt. Refer to the Cooling System section.
  6. Adjusting T-bolt and tighten belt.
  7. Remove jackstand from under radiator and install lower radiator crossmember support.
  8. Reposition transmission cooler and tighten fasteners.
  9. Install lower plastic splash shield.
  10. Lower vehicle.
  11. Connect negative battery cable.

 

David Dill and 4 other Chrysler Specialists are ready to help you