How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Roland Your Own Question
Roland, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 445
Experience:  Chrsyler Master Certified. ASE Certified. Worked at Dealership for 18 years
Type Your Chrysler Question Here...
Roland is online now
A new question is answered every 9 seconds

Removed the door panels from my 2005 chrysler town and country

Customer Question

how do i removed the door panels from my 2005 chrysler town and country
Submitted: 6 years ago.
Category: Chrysler
Expert:  Roland replied 6 years ago.

Which door panel are you trying to remove?

Customer: replied 6 years ago.
drivers side
Expert:  Roland replied 6 years ago.

The drivers side sliding door or front door?


Customer: replied 6 years ago.
front door
Expert:  Roland replied 6 years ago.

Here is the procedure to remove the drivers front door panel,



  1. Remove the plug and remove screw attaching door pull cup to inner door panel.
  2. Remove switch bezel and disconnect power window/memory switch.
  3. Remove screws attaching trim panel to door from below map pocket.
  4. If equipped, remove window crank. (Refer to 23 - BODY/DOOR - FRONT/WINDOW CRANK - REMOVAL)
  5. Remove screw holding door trim to door panel from behind inside latch release handle .
  6. Disengage clips attaching door trim to door frame around perimeter of panel.
  7. Lift trim panel upward to disengage flange from inner belt molding at top of door.
  8. Tilt top of trim panel away from door to gain access to latch linkage.
  9. Disengage clip attaching linkage rod to inside latch release handle (INSIDE DOOR HANDLE LINKAGE).
  10. Separate linkage rod from latch handle.
  11. Disconnect the power door switch, courtesy lamp electrical connectors.
  12. Remove front door trim panel from vehicle.

Related Chrysler Questions