How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, triple chrysler master tech
Category: Chrysler
Satisfied Customers: 2251
Experience:  43 years,triple chrys ,ase master tech,l1,t2 b5 a1-a8 Hev spec.
9510839
Type Your Chrysler Question Here...
John is online now
A new question is answered every 9 seconds

Chrysler 2.5crd grand voyager 2004 torque settings needed

This answer was rated:

Chrysler 2.5crd grand voyager 2004
torque settings needed for big end caps,
balance shaft setting or timing information needed
We didnt take the balance shaft assembly off the engine.
hi my name is John.

Here the torque for the whole engine 2.5 crd

graphic
graphic
graphic
graphic
graphic
graphic
graphic
graphic
graphic
graphic
Will send some more in a little bit
note
CAUTION: IT IS CRITICAL THAT BOTH HALVES OF
THE CRANKSHAFT SUPPORT ARE ALIGNED PROPERLY
WITH THE ENGINE TO SUPPORT ENGINE OIL
MANAGEMENT.
NOTE: Before installing crankshaft in engine block,
be sure the notches in the crankshaft supports are
facing towards the front of the engine

graphic
graphic
graphic
graphic
graphic
graphic
graphic

Let me know if you need more.

If I have help you,please push the accept button when were done.

Thank you for choosing just answer
Customer: replied 6 years ago.
We still need to know the procedure to install the balance shaft assembly which bolts on below the crankshaft.
it is timed off the crankshaft we assume.
Regards Ross
Here for the balance shaft.

graphic
graphic
Customer: replied 6 years ago.
Thanks John.
is it possible to send fig 98 & fig99 so we can see where to insert locking pins.
Thanks for your help so far, very difficult for us to get info on these cars in France.
Ross
Here you are.

graphic
That is 98.

Here 99.

graphic
graphic

Let me know if you need more.

If I have help you,please push the accept button when were done.

Thank you for choosing just answer
John and 2 other Chrysler Specialists are ready to help you
Customer: replied 6 years ago.
Cheers John.
If your ever in France, pop in for a coffee!
That sound great, thank you

John.

Where are you if i did?
Customer: replied 6 years ago.
Normandy which is north west France, our nearest town is Mortain. should be able to google that.
Grand voyager sump going on now so we can see if shes a runner.( came to us a
boot full of bits.)Ross
Thank Ross

Related Chrysler Questions