How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric
Eric, Automotive Repair Shop Manager
Category: Chrysler
Satisfied Customers: 30241
Experience:  20+ years experience as automotive store manager and technician.
3195632
Type Your Chrysler Question Here...
Eric is online now
A new question is answered every 9 seconds

2000 Town & Country: van..V 6..oil pressure sensor switch is bad

This answer was rated:

I have a 2000 Town & Country van, V 6 and the oil pressure sensor switch is bad. What is the estimate to get it replaced?
Thanks, XXXXX XXXXX

Hi,

 

The sensor is around $15-20, and labor is 0.7 hours. Hourly labor rates are set by each individual shop according to its overhead, but national hourly labor rates vary from $80-120 per hour.

 

So, low side labor would be .7 x $80 = $56, and high side labor would be .7 x $120 = $84.

 

So an estimate somewhere between $76 parts and labor to $104 parts and labor

 

2000 Chrysler Truck Town & Country LWB FWD V6-3.3L VIN R

PartOEM PartPrice
Oil Pressure Sender
Oil Pressure Sending Unit4608303$20.00
LaborStandard
Oil Pressure Sender
Replace0.7

 

Eric and 6 other Chrysler Specialists are ready to help you