How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, triple chrysler master tech
Category: Chrysler
Satisfied Customers: 2251
Experience:  43 years,triple chrys ,ase master tech,l1,t2 b5 a1-a8 Hev spec.
9510839
Type Your Chrysler Question Here...
John is online now
A new question is answered every 9 seconds

I got a code PO562. what could cause this?

Resolved Question:

i got a code PO562. what could cause this?
Submitted: 7 years ago.
Category: Chrysler
Expert:  John replied 7 years ago.
Hi my name is John.

P0700 is just tell you there is a code in the TCM which is p0715.

p0302 is a miss fire on the #2 cylinder.

P0562 is for a low battery., Have you tested the battery system?

P0715 is a code for a input speed sensor error.

If the voltage from the battery is under 12 volts it could cause all these codes.

Do you have a volt/ohm meter?
Customer: replied 7 years ago.
I have not tested the battery system. The negative battery cable is real corroded. I'm cleaning the cables right now. I don't have a volt/ohm meter.
Expert:  John replied 7 years ago.
That could be the problem, I would clean it up really good with like water .

Let me know.

Expert:  John replied 7 years ago.

Did that fix it or do you need more?

 

If I have help you,please push the accept button when were done.

 

Thank you for choosing just answer

John and 5 other Chrysler Specialists are ready to help you
Customer: replied 7 years ago.
It did not help.
Expert:  John replied 7 years ago.
Here some test for you to do.

graphic
graphic
graphic
graphic
graphic
Here for the transmission.

P0700,p0715

graphic
graphic
graphic
graphic
graphic
graphic
graphic
graphic
graphic
let me know
Customer: replied 7 years ago.
I had to take the car to a transmission shop to get the problem taken care of. They replaced the two sensers on the trans. That took care of the problem.
Expert:  John replied 7 years ago.
That great, have a good day.

So code p0715 was part of the problem.

If I have help you,please push the accept button when were done.

Thank you for choosing just answer