How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, triple chrysler master tech
Category: Chrysler
Satisfied Customers: 2251
Experience:  43 years,triple chrys ,ase master tech,l1,t2 b5 a1-a8 Hev spec.
Type Your Chrysler Question Here...
John is online now
A new question is answered every 9 seconds

the clock on dash stopped working on my 1999 300M any way to

This answer was rated:

the clock on dash stopped working on my 1999 300M any way to repair it
Hi my name is John.

Have you check the fuse for the clock?

It is fuse 19 in the inside fuse box.

Do you have a volt /ohm meter to test the ground?

Is the clock in the radio turn on?
Customer: replied 7 years ago.
Yes fuse is okay and has power, its the analog clock mounted in the dash.
I know that ,did you check the ground for the clock to see if it had high resistance.

It should read .5ohm or less.
Customer: replied 7 years ago.
husband wants to know how to do that and why should he do that lol hes a man and thinks he knows it all :-| He only checked to see if it had power going to it.
You have to have a ground at the clock also or it will never work,it complete the circuit.

It is pin 2 on the connector at the back of the clock.

G201 is the ground.

here how to pull the clock out to get to the connector.


Customer: replied 7 years ago.
He is going to check, botXXXXX XXXXXne is it fixable or is dead?
If the ground is good and there 12 volt to it,than you need to buy a new clock.

Let me know what else i can do for you.

If i have help you,please push the accept button when were done.

Thank you for choosing just answer.

There is a clock in the radio also.
John and 7 other Chrysler Specialists are ready to help you
Customer: replied 7 years ago.
Okay thank you very much for your help and patiences :)
thank you


Related Chrysler Questions