How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard, Chrysler Technician
Category: Chrysler
Satisfied Customers: 4141
Experience:  Over 24 years of experience as lead tech and shop foreman.
Type Your Chrysler Question Here...
Richard is online now
A new question is answered every 9 seconds

OBD Code 340 - Cam Position Sensor. I recently replaced the

Resolved Question:

OBD Code 340 - Cam Position Sensor. I recently replaced the sensor due to check engine light and and OBD II code 340. The car ran perfect for about a week. Yesterday morning, it cranked longer than usual but started. The check engine light came on. Using OBD II scanner, it again says Code 340. "Camshaft Position Sensor A - Bank 1 Circuit Malfunction"2004 Concorde, 3.5l,
104,275 mi. (I did clear the code after installing the new sensor.
Submitted: 8 years ago.
Category: Chrysler
Expert:  Richard replied 8 years ago.
Hi there! It sounds like your cam sensor has failed again. Did you use OEM parts or a jobber part?
Customer: replied 8 years ago.

I just went to a local auto parts store. Unfourtunately, I have thrown the box away. I may still have the receipt. I do know the box did not say Mopar. I put new gaskets on the intake and throttle body. After just 1 week, if I have to get a new Mopar part, should I replace them again?

Thanks for your help in this matter.

Expert:  Richard replied 8 years ago.
The gaskets should be OK, just get the OEM sensor. The part number is(NNN) NNN-NNNN
Richard and 4 other Chrysler Specialists are ready to help you

Related Chrysler Questions