How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask David Dill Your Own Question
David Dill
David Dill, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 1314
Experience:  19 years as Technician, 14 years with Chrysler Group LLC
14774302
Type Your Chrysler Question Here...
David Dill is online now
A new question is answered every 9 seconds

diagram for chrysler pacifica 2005 to change spark plugs

Resolved Question:

diagram for chrysler pacifica 2005 to change spark plugs
Submitted: 7 years ago.
Category: Chrysler
Expert:  David Dill replied 7 years ago.

The upper plenum has to be removed as you can see to get to the front plugs. Here are the instructions.

  • Disconnect negative battery cable.
  • Remove air cleaner housing and inlet hose.
  • Remove engine cover.
  • Remove throttle and speed control cables from throttle arm and bracket.
  • Remove the two cable bracket retaining bolts and position the cables and bracket assembly out of the way.
  • Remove the oil fill tube to upper intake manifold retaining bolt.
  • Remove the oil level tube to upper intake manifold retaining bolt.
  • Disconnect electrical connectors from the following sensors and actuators:
    • Manifold Tuning Valve (MTV)
    • Short Runner Valve
    • Exhaust Gas Recirculation (EGR)
    • Throttle Position Sensor (TPS)
    • Idle Air Control (IAC)
    • Manifold Absolute Pressure (MAP)
  • Remove alternator support bracket.
  • Disconnect the EGR tube.
  • Disconnect vacuum hoses from the following:
    • Positive Crankcase Ventilation (PCV) Valve
    • EVAP Purge Solenoid
    • Power Brake Booster
  • Remove the front and rear intake manifold support brackets
  • Remove the upper intake manifold retaining bolts and manifold. Clean all gasket sealing surfaces.
  • Customer: replied 7 years ago.
    i needed a diagram for screws on engine cover and electrical connectors
    Expert:  David Dill replied 7 years ago.

    There really isn't anything specific that shows all the bolt positions. I'll send what I can dig up but they don't show exact locations and bolt lengths.

     

    David Dill and 5 other Chrysler Specialists are ready to help you