How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask marcpod Your Own Question
marcpod
marcpod, Own collision repair advice
Category: Chrysler
Satisfied Customers: 2881
Experience:  i-car/ASE/Basf training, 300 repairs and 650,000 in Collision monthly 18yrs exp/ licensed adjuster
17579256
Type Your Chrysler Question Here...
marcpod is online now
A new question is answered every 9 seconds

How to flush my chrysler 300 limited engine coolant

Customer Question

how to flush my chrysler 300 limited engine coolant
Submitted: 7 years ago.
Category: Chrysler
Expert:  marcpod replied 7 years ago.
Welcome to just answer. Can you give us the yr and engine size.
Customer: replied 7 years ago.
3.5
Expert:  marcpod replied 7 years ago.
the year please just to make sure.
Customer: replied 7 years ago.
2005 300 limited 3.5 engine 58123 miles
Expert:  marcpod replied 7 years ago.

Here is the information. If you need anything just let me know. if you accept this please hit the green payment tab. Bonuses are always appreciated. thank you.

 

DRAINING COOLING SYSTEM - ALL ENGINES

WARNING: DO NOT REMOVE CYLINDER BLOCK DRAIN PLUGS OR LOOSEN RADIATOR DRAINCOCK WITH SYSTEM HOT AND UNDER PRESSURE. SERIOUS BURNS FROM COOLANT CAN OCCUR.

DO NOT WASTE reusable coolant. If solution is clean, drain coolant into a clean container for reuse.

  1. Remove radiator pressure cap.
  2. Loosen radiator petcock.

  1. Remove drain plug (1). WARNING: DO NOT REMOVE CYLINDER BLOCK DRAIN PLUGS OR LOOSEN RADIATOR DRAINCOCK WITH SYSTEM HOT AND UNDER PRESSURE. SERIOUS BURNS FROM COOLANT CAN OCCUR. DO NOT WASTE reusable coolant. If solution is clean, drain coolant into a clean container for reuse.
  2. Remove radiator pressure cap.
  3. Loosen radiator petcock.

  1. Remove cylinder block drain plugs (1).

 

Customer: replied 7 years ago.
After checking that out later I'll contact you. Thank you. Customer
Expert:  marcpod replied 7 years ago.
Your welcome.
Customer: replied 7 years ago.
Hello Marcpod, Good Morning!
I did not take any action yet. However, the graphics you've sent me are disappeared. I can't agree until I get them back and follow the instructions to perform the job. Then, I will click the agree button.
Expert:  marcpod replied 7 years ago.

Ok Here you go buddy.

DRAINING COOLING SYSTEM - ALL ENGINES

WARNING: DO NOT REMOVE CYLINDER BLOCK DRAIN PLUGS OR LOOSEN RADIATOR DRAINCOCK WITH SYSTEM HOT AND UNDER PRESSURE. SERIOUS BURNS FROM COOLANT CAN OCCUR.

DO NOT WASTE reusable coolant. If solution is clean, drain coolant into a clean container for reuse.

  1. Remove radiator pressure cap.
  2. Loosen radiator petcock.

  1. Remove drain plug (1). WARNING: DO NOT REMOVE CYLINDER BLOCK DRAIN PLUGS OR LOOSEN RADIATOR DRAINCOCK WITH SYSTEM HOT AND UNDER PRESSURE. SERIOUS BURNS FROM COOLANT CAN OCCUR. DO NOT WASTE reusable coolant. If solution is clean, drain coolant into a clean container for reuse.
  2. Remove radiator pressure cap.
  3. Loosen radiator petcock.

  1. Remove cylinder block drain plugs (1).

Related Chrysler Questions