How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask John Your Own Question

John
John, triple chrysler master tech
Category: Chrysler
Satisfied Customers: 2251
Experience:  43 years,triple chrys ,ase master tech,l1,t2 b5 a1-a8 Hev spec.
Type Your Chrysler Question Here...
John is online now
A new question is answered every 9 seconds

My key wont turn in my ignition on my 2001 voyager, what is wrong?

Resolved Question:

my key won't turn in my ignition on my 2001 voyager, what is wrong?
Submitted: 5 years ago.
Category: Chrysler
Expert:  John replied 5 years ago.

Hi my name is John.

 

The tumbler are stuck.Try tapping on the end of the key with a plastic hammer several times while tring to turn the key.

John, triple chrysler master tech
Category: Chrysler
Satisfied Customers: 2251
Experience: 43 years,triple chrys ,ase master tech,l1,t2 b5 a1-a8 Hev spec.
John and 10 other Chrysler Specialists are ready to help you
Customer: replied 5 years ago.
Hi,
thanks for your reply, after trying your suggestion for about five minutes, it still wouldn't work, you might want to add that you need to move the steering whell back and forth and then it worked! the only problem is now, it happens every time i try to start my van, any suggestions on that? is the ignition going bad?
thanks so much!
Judy
Customer: replied 5 years ago.
I want to say, that i am very happy for your answer, i am very pleased that i didn't have to call a tow truck!!!!!!!!!!!!!!!
Expert:  John replied 5 years ago.

That good,but you will need to have the ignition lock cylinder replaced.

 

Are you going to do this ,if you are I can tell you how to replace the lock cylinder.

JustAnswer in the News:

 
 
 
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
 
 
 

What Customers are Saying:

 
 
 
  • I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat. Stan Sayre, PA
< Last | Next >
  • I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat. Stan Sayre, PA
  • I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP. TOM WHITTAKER USA
  • Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless! Rev. Jerry Baysinger Holts Summit, Mo
  • I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again. Greg Pittsburgh, PA
  • Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless! Jerry Holts Summit, MO
  • Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor. Lynn B. Ormond Beach, FL
  • Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help. Mary C. Freshfield, Liverpool, UK
 
 
 

Meet The Experts:

 
 
 
  • Don 'Mo Lurch'

    Aftermarket & Factory Electronics

    Satisfied Customers:

    384
    Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
< Last | Next >
  • http://ww2.justanswer.com/uploads/MO/molurch/2012-6-6_214526_500.64x64.png Don 'Mo Lurch''s Avatar

    Don 'Mo Lurch'

    Aftermarket & Factory Electronics

    Satisfied Customers:

    384
    Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
  • http://ww2.justanswer.com/uploads/2P/2paulm/2012-4-4_183431_justabswer.64x64.jpg Paul M ASE Master's Avatar

    Paul M ASE Master

    ASE Master Tech

    Satisfied Customers:

    117
    ASE Master Tech 20+ Years
  • http://ww2.justanswer.com/uploads/MU/muddyford/2012-6-13_1204_1.64x64.png Chris (aka - Moose)'s Avatar

    Chris (aka - Moose)

    Technician

    Satisfied Customers:

    93
    16 years of experience
  • http://ww2.justanswer.com/uploads/IV/ivestoy2/2011-7-21_44030_ivan.64x64.jpg Ivan's Avatar

    Ivan

    ASE Certified Master Technician

    Satisfied Customers:

    55
    ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.
  • http://ww2.justanswer.com/uploads/AC/acuramstr/2012-6-6_181032_me.64x64.jpg AUTOMSTR's Avatar

    AUTOMSTR

    ASE Certified Technician

    Satisfied Customers:

    0
    ASE Master Tech, L1, CA Smog ,30 YRS EXP
  • http://ww2.justanswer.com/uploads/AM/amedee/2013-10-24_23656_Amedee1.64x64.jpg Amedee's Avatar

    Amedee

    Chrysler Technician

    Satisfied Customers:

    787
    ASE Master Technician advanced level specialist
  • http://ww2.justanswer.com/uploads/SU/supermechanic/2013-8-23_03546_500.64x64.jpg Jerry's Avatar

    Jerry

    Master Mechanic

    Satisfied Customers:

    432
    ASE Master tech. 30+ years mechanic, shop forman, service manager