How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff
brownjeff, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
11021861
Type Your Chrysler Question Here...
brownjeff is online now
A new question is answered every 9 seconds

how to replace 3rd brake light on 2002 sebring

Customer Question

how to replace 3rd brake light on 2002 sebring
Submitted: 8 years ago.
Category: Chrysler
Expert:  brownjeff replied 8 years ago.

REMOVAL

  1. Disconnect and isolate the battery negative cable.
  2. Remove fasteners from trunk latch cover by prying under the head of the fastener with a flat bladed tool.
  3. Remove trunk latch cover.
  4. Rotate socket counterclockwise one quarter turn.
  5. Pull socket from back of lamp.
  6. Pull bulb from socket.
Customer: replied 8 years ago.
the whole 3rd brake light
Expert:  brownjeff replied 8 years ago.

REMOVAL

  1. Disconnect and isolate the battery negative cable.
  2. Remove fasteners from trunk latch cover by prying under the head of the fastener with a flat bladed tool.
  3. Remove trunk latch cover.
  4. Remove socket from CHMSL.
  5. Remove screws attaching CHMSL to decklid (CENTER HIGH MOUNTED STOP LAMP).
  6. Remove CHMSL from decklid

1 - BULB
2 - FASTENER
3 - LAMP UNIT

.

Related Chrysler Questions