How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff
brownjeff, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
11021861
Type Your Chrysler Question Here...
brownjeff is online now
A new question is answered every 9 seconds

Im replacing the NVLD assembly on a 2004 Chrysler 300 M Special.

Resolved Question:

I'm replacing the NVLD assembly on a 2004 Chrysler 300 M Special. Looks like you've got to drop the rear anti-sway bar to gain clearance for the assembly that includes the charcoal cannister? Do you access the vacuum lines and one electrical connection from an access plate in the trunk under the carpet? Any help is appreciated. Thanks.
Submitted: 7 years ago.
Category: Chrysler
Expert:  brownjeff replied 7 years ago.

You will need to drop the fuel tank for this repair! I will attach information for the repair. If you still need help just reply, if not click ACCEPT when we are done.

 

Thanks,

 

JB

 

  1. Disconnect the negative battery cable.
  2. Remove fuel tank.
  3. Disconnect the electrical connector from the NVLD assembly.
  4. Disconnect the hoses from the NVLD assembly (Fig. 5).
  5. Lift tab on NVLD assembly (LOCKING TAB) and twist the assembly counterclockwise and pull up to remove from EVAP canister (ASSEMBLY REMOVED).
  6. Remove O-ring from EVAP canister (O-RING).

 

brownjeff and 4 other Chrysler Specialists are ready to help you

Related Chrysler Questions