How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Vipertech Your Own Question
Vipertech
Vipertech, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 1854
Experience:  11 years of Factory Dodge, Jeep and Chrysler training
3256298
Type Your Chrysler Question Here...
Vipertech is online now
A new question is answered every 9 seconds

1997 chrysler sebring: the serpentine belt and the p/s belt..2.5L..V6

Customer Question

How do I change the serpentine belt and the p/s belt on a 1997 chrysler sebring with a 2.5L V6?
Submitted: 8 years ago.
Category: Chrysler
Expert:  Vipertech replied 8 years ago.

Good evening, here is the info you requested:

 

ACCESSORY DRIVE BELT - 2.5L ENGINE

AIR CONDITIONING BELT AND GENERATOR BELT

To remove and install the air conditioning compressor and generator drive belt, first loosen the idler pulley lock bolt, then turn the adjusting screw to increase or decrease the idler pulley tension.

 

To adjust the air conditioning and generator drive belt, loosen the idler pulley bolt and adjust belt tension by turning adjusting screw.

Tighten pulley bolt to 54 N·m (40 ft. lbs.) after adjustment.

POWER STEERING PUMP BELT

  1. From the top of the vehicle loosen pivot bolt
  2. From under the vehicle loosen the locking bolts F and G
  3. Install the belt. Adjust belt tension with 1/2 in. breaker bar installed in adjusting bracket
  4. Tighten locking bolt G to 28 N·m (250 in. lbs.)

  1. Tighten locking bolt F and the pivot bolt to 54 N·m (40 ft. lbs.)

 

If this answers your question then please press ACCEPT so that I may be paid for the time spent helping you. If you need more help then please let me know. Thanks