How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JOHN aka Eauto Your Own Question
JOHN aka Eauto
JOHN aka Eauto, The Car Guy
Category: Chevy
Satisfied Customers: 15525
Experience:  ase tech
6149662
Type Your Chevy Question Here...
JOHN aka Eauto is online now
A new question is answered every 9 seconds

I was working on my steering, with the steering wheel

This answer was rated:

I was working on my steering, with the steering wheel disconnected, the steering wheel was moved multiple times. My advanced OBD reader says the steering wheel is not "centered" and my traction control light is now on. How can I recenter the steering wheel? are there any other steps to determine why the traction light is on?

Hi . Thank you for asking your question on JustAnswer.

Thank you again for trusting us with your problem. John aka eauto

you need a advanced scan tool to set the steering angle sensor...what scan tool are you using?

Customer: replied 5 days ago.
it's an Innova 3160.

you will need either a snap on or a gm tech 2 or another similar high end scan tool to set the steering angle or yaw sensor....most shops that perform wheel alignmnets are equipped....but sorry to say the innova is not capable

Customer: replied 5 days ago.
Would that set off the traction control system? Thanks for your help!

yes it would store a abs or traction control code....

JOHN aka Eauto and other Chevy Specialists are ready to help you