How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chevy
Satisfied Customers: 22368
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Chevy Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2011 duramax. starting stalling while towing horse trailer.

Customer Question

2011 duramax. starting stalling while towing horse trailer. took to dealership- they said crank shaft sensor and replaced. i just got it back and JUST made it into the parking lot at work-- 2 miles-- and it died
JA: Does the vehicle stall at low speeds? Does it sputter?
Customer: traveling at around 65/70 when it happened the first time. they test drove it on the highway, so same mph. the road back to my work is 40mph
JA: What is the model of your '11 Chevy?
Customer: 2500hd
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: the dealership "fixed" it. i just picked it up from them although, it's not fixed chevy dealership
JA: Anything else you want the mechanic to know before I connect you?
Customer: I'm don't have a clue
Submitted: 4 months ago.
Category: Chevy
Expert:  sprinkles08 replied 4 months ago.

Hello and welcome to JustAnswer!

If they replaced the crank sensor I'm assuming it was because they found a crank sensor signal or circuit fault code had set. If so and the sensor didn't fix it then you most likely have a wiring or connection isue.

Have you checked for fault codes since the last time the problem happened?

Related Chevy Questions